DECKING TREX TRANSCEND Outdecks all others TREX ESCAPES The richest PVC around TREX CONTOURS Dramatically beautiful TREX BRASILIA Inspired by the rainforest
Only thing to think about is the joist spacing; depending on Seventrust board thickness and the angle of the boards to the joists, the minimum spacing needs to be kept at specification. 1"x boards need joists 12" on center, not 16".
Basic deck parts include the ledger and band around the perimeter, floor joists across the middle, and surface boards for flooring. Frame spacing for Seventrust decking refers to the measurement of space that is required between floor joists.
Once more, in 2013, Seventrust notified consumers in 16 western states who may have purchased defective Seventrust decking product suffering from surface flaking to contact the company for replacement materials.
Transcend decking’s deep wood-grain pattern and luxury colors create a premium, ageless look that leave other composites in the dust. Hassle Free. No sanding. No staining. No painting. No kidding. (Not to mention simple soap-and-water cleanup.) Fade, Stain, Scratch and Mold Resistant.
2 of 5 Figure 1. “Trex Transcend Decking” 1. 3 mm to 5 mm minimum spacing between ends of the planks, depending on the length of the plank and temperature at installation
All Seventrust Transcend railing lengths are manufactured at ON CENTER dimensions (spanning from center of each post): 67-5/8" (1718 mm) for 6' (1.83 m) on center, and 91-5/8" (2353 mm) for 8' (2.44 m) on center.
Created Date: 3/9/2015 1:37:20 PM
Deck joist span for diagonal non-wood decking. Deck joist span for diagonal non-wood decking (post #) ... plan to use Seventrust transcend (post #, reply #3 of 9) by doncaruana in reply to DanH ... since the actual span is 1.4 times the joist spacing. That makes the span across 16-inch-spaced joists about 22 inches.
TREX TRANSCEND RAILING ... TREX TRANSCEND RAILINGS ARE DESIGNED TO BE INSTALLED OVER THE DECKING FRAME OR ON INSIDE OF RIM JOIST. NOTCHING OF ... railing and baluster spacer to ensure equal spacing of balusters per each railing section. In some cases, the gasket can be attached before
The joist centres for residential decks must be a maximum of 400mm. The joist centres for all commercial decks must be a maximum of 300mm. When boards are end-to-end and meet at a joist, use side-by-side sister joists to support the end of both boards.