If you're using ready-made fence panels, post spacing is already determined. If you're building your own fence using individual fence boards, choose a distance between 5 and 8 feet.
We're going to dig 2' deep fence post holes and set them with Fence Post 'cement'. But were curious whether there is a "standard" that shold be used for the distance BETWEEN each Fence Post? This is a relatively flat yard that we're building this fence for.
Decide how far apart you’d like to set the fence posts. Typically, fence posts are spaced between six and eight feet apart. The corner posts are set first. To align all of the posts in between, stretch a line from each corner post to work as your guide. Mark the exact position where you’d like each post hole dug.
Wooden Fences. If you're using ready-made fence panels, post spacing is already determined. If you're building your own fence using individual fence boards, choose a distance between 5 and 8 feet.
Don’t cut notches in the posts to hold the rails; it creates a lot of work and weakens the posts. Narrow edge up: Cut the rails so joints fall at the center of posts and the ends butt together tightly. Fasten the rail to the posts with #8 2½-inch deck screws.
Posts are made to accept either two or three rails. Two-rail fence posts are approximately 6 feet long, and three-hole posts are approximately 7 feet long. Posts are predrilled for use as end, corner or line. End posts are drilled halfway and are used as starting and stopping points.
The most important part of a fence is underground: the posts. When planning the height of your posts, plan for a clearance of at least 6 inches from the ground to the lowest rail to allow mowing and trimming. Add a couple of inches for settling over time. The best practice is to put 1/3 of the post in the ground.
For example, fencing like Electric Tape is designed to flex 4-5 inches on impact before coming back into place, or breaking free if your horse puts over 750 lbs. of pressure on the rail. With 8', 10' or 12' post spacing, the fence is able to do it's job and either come back into place, or release so your horse is less likely to get tangled or possibly injured.
Split rail fences were made of easy to split, rot-resistant wood. Traditionally American chestnut was the timber of choice until chestnut blight eliminated this tree. Currently, most split rails are made from cedar. Whether of chestnut or cedar, these logs were cut to a length of 10 to 12 feet (3.0 to 3.7 m) and split down the length of the log.
Mark each post at 36 inches from its bottom end. This measurement takes the depth of the post's hole—24 inches—and adds the 12-inch-high string line.
The length of space between post holes varies depending on the exact measurements of the building site and the length of rails chosen. Most rail fence posts are spaced 10 feet (3.0 meters) apart.