Star brite Non-Skid Deck Cleaner with PTEF is the most effective and easiest way to clean textured fiberglass or painted decks. The special chelating agents loosen dirt and spills without the need for heavy scrubbing.
Head to shurhold.com to order all of the detailing gear you need to keep your boat Clean-N-Simple. Today, we take a look at the best method for cleaning non-skid surfaces on your boat.
It is specifically designed to retain and enhance the appearance of colored concrete and exposed aggregate surfaces for years to come. The compound contains a slip-resistant additive, which establishes an easy-to-clean, non-slip surface for traditionally slippery areas. USES DECK-O-GRIP is designed for various exterior concrete applications, including swimming pool areas and exposed aggregate.
Cleans non-skid surfaces. Designed to clean hard-to-reach ground-in dirt and stains on non-skid surfaces. Safe for use on fiberglass, metal and painted surfaces.
I waxed my non skid deck with the shurhold pro polish and an orbital buffer. Looked great - didn't slip and washing all the gunk that ends up on the deck (blood, guts, etc) wash of very easily. Shurhold has a youtube page and website with simple instructions on how to wax a non skid deck.
Non-Skid Deck Cleaner is the most effective and easiest way to clean textured fiberglass or painted decks. The special chelating agents loosen dirt and spills without the need for heavy scrubbing. The protective polymers provide a barrier against future stains, making clean up a breeze.
Starbrite Non-Skid Deck Cleaner wih PTEF. PRICE: £11.95 for 1lt What the instructions say: Wet the deck, before squirting the product neat onto the deck and distributing it with a deck brush. Leave for 2-3 minutes for the ‘chelating agents’ to lift the dirt from the non-slip surface, before agitating with a deck brush and rinsing off.
Apply a small amount of Aurora Boat Scrub to the Non Skid area and brush in opposing directions with a deck brush or other stiff brush. Rinse with clean water and dry with a chamois or let air dry. Rinse with clean water and dry with a chamois or let air dry.
Resene Non-Skid Deck & Path is a waterborne coating filled with graded silicas that can be tinted to a range of standard colours. Designed for use on both exterior and interior trafficable areas where a durable, tough, non-skid finish is desired.
The Starbrite non-slip deck cleaner with PTEF helps to repel dirt after they are clean. I really like this product. I put it on a wet surface and apply it with a brush over a small section.
The area does not have to be restricted due to ventilation or curing times, as with non-skid paint. The finished surface is immediately ready for use. Silvagrip’s superiority in durability results in less replacement and the total cost of ownership is significantly lower over the life of the product.
How To Apply KiwiGrip Non Skid Deck Paint. Preparation: Always apply KiwiGrip over a completed and sealed surface finish. In the case of new construction, completely paint the boat to a finished stage. Mark out selected areas for the application of KiwiGrip with a soft pencil, using compass or calipers to mark curves.
Application: Shake ‘N Bake Method Adding a Non skid texture to an old deck Step 1 Thoroughly clean the deck area that you are going to paint (household liquid detergents and abrasive cleaners are ideal for this job) and then wash down with fresh water and allow to dry.
What I use to keep deck spotless is StarBrite non-skid deck cleaner but I mix 1/3 simple green and 1/3 bleach to 1/3 Starbrite. Then I use woody wax right after rinsing. Deck stays immaculate with a simple rinsing for up to 2 months.
I put the poliglow on everything including the "non-skid" deck pattern. I took a lot of time cleaning the non-skid with PoliPrep and a stiff brush until it was perfectly clean. You must do this because the PoliGlow sealer will seal in any dirt specs in the pattern.
Cleaning gelcoat non-skid involves the removal of surface dirt and stains. This can be a one-, two- or three-step procedure, depending on the how stubborn the dirt and stains are to remove. After completing step one, two, or three (as the situation dictates) you can, depending of the condition of your non-skid, move on to optional step four.
This is another cheap and easy way to clean non skid areas. Crush a dishwasher tablet and mix with more bicarbonate of soda, wet the surface the sprinkle this on. move around with a brush and this should lift most dirt.
CLEAN AND SHINE NON-SKID BOAT DECKS Textured Non-Skid or Anti-Slip boat decks, cockpits and swim platforms provides important traction, but they all suffer from the same problems. They’re constantly getting chalky and dirty. They stain easily from fish blood, red wine and bird droppings. They require constant scrubbing to keep them clean.
The PTEF polymers provide a barrier against future stains, making clean up a breeze. It also is ideal for cleaning non-textured areas as well as all fiberglass, vinyl, plastic, metal or rubber surfaces. Wet deck with water. Squirt Star brite Non-Skid Deck Cleaner over surface to be cleaned and spread evenly with deck brush.