Aluminum Pergolas. Add beauty and shade without the maintenance of wood with a Coolbreeze Aluminum Pergola from Nexan. Nexan aluminum pergolas are built to last with heavy duty-extruded aluminum coated with an AAMA 2604 certified powder coat finish.
Glossary of Terms and Definitions for Patio Covers . ... Alumawood is available in Solid Roof Newport Patio Covers and Open Roof Laguna Pergola Lattice Covers. ... One part of a two piece hinge for attaching to fascia that is not plumb. Attached. Awning attaches to house/structure either at the wall, eaves/fascia or roof top. ...
HB&G Fiberglass & PVC Pergolas. Pergolas are a great additional feature to the exterior of your home. Pergolas are a welcome addition for a walkway, passage way, as well as sitting areas. We offer are fiberglass and PVC, rather than your traditional style brick, stone, or wood for our modern Pergolas.
Our company delivers stock fiberglass pergola kits with round or square columns with 12×12, 14×14, and 16×16 footprints in less than 2 weeks. We eliminate one of the cons listed above as far as lead-times are concerned.
The pergola i want to build is a 3metre by roughly 6 metre structure. It will be fully supported by the fascia connection on the 6 metre side. So width is only 3 metres. height to the fascia is about 2.5metres and the same goes for the post heights. The fascia ledger and the rafters were going to be 140*45 and the the main beams to be 190*45.
To keep the roof of the pergola even and level across the whole topside, you’ll need to cut each post exactly. Just clamp or nail a board temporarily to the fascia as shown in (Photo 4). Measure down 10-1/2 in. from the top of your fascia board for the cutoff height of your columns (95 in. for ours).
Step 1: Attach a Header Board to the Fascia. The existing fascia board may be strong enough to hold the pergola but it is easier to reinforce the fascia by attaching a 2 x 8 header board to it. Drill holes into the header board and fascia board and attach, using the 3/8-inch lag bolts and washers.
How to connect your pergola to your home Build like the Pros. ... Connecting your pergola to your house is important to get right. Failure to connect properly could result in your verandah falling ...
Shop pergolas in the pergolas & accessories section of Lowes.com. Find quality pergolas online or in store. Skip to main content Skip to main navigation. ... Americana Building Products Americana 120-in W x 120-in L x 112.5-in H White Attached Pergola Enter your location. for pricing and availability. OK. ZIP Code. Compare.
attach pergola to roof pergola attached pergola s pergola ideas . Find this Pin and more on Specialty Roof Brackets from Simpson Strong Ties by Eric Gunderson . Simpson Strong Ties can fabricate specialty brackets so you can attach your pergola to the roof.
Williamsburg Fiberglass Pergolas & Pergola Kits greg T11:43:0400:00 Williamsburg Fiberglass Pergola Structureworks fiberglass is used to create the strongest pre-engineered fiberglass pergola kits available.
Attached pergolas have one side attached to the wall of a home or structure. They use the wall to support that side of the pergola, and the other side of the pergola is supported by beams and posts anchored to the ground.
If not, measure and cut a piece of 2-by-8-inch lumber to the same length as the side of the pergola that will be attached. Step 2 Attach the cut 2-by-8-inch lumber to the outside of the fascia board, using heavy-duty lag screws and washers.
One is using a ledger attached to the wall, another is attached to the fascia board - this is restricted to a max of 8 ft wide and having a lattice roof. I just finished an "attached" patio that ties into the roof deck with 2 in straps (Simpson MST 48s), the roof is 6:12 with the same tile as the house.